4.4.5.4 Phone Directory

Function:

The function allows the operator to print out the Phone Directory report

 

manually. A brief description of "Phone Directory Report" will be given in

 

Section 4.6 Reports and Lists.

Operation:

The operation is shown in Fig. 4-3-1 and 4-3-12.

4.4.5.5 Configuration Report

Function:

The function allows the operator to print out the configuration report manually.

 

A brief description of "Configuration Report" will be given in Section 4.6

 

Reports and Lists.

Operation:

The operation is shown in Fig. 4-3-1 and 4-3-12.

4.4.5.6 Service Default Report (Configuration Report Service-Bit=ON)

Function:

The function allows the operator to print out the service default report manu-

 

ally for maintenance purpose. A brief description of "Service Default Report"

 

will be given in Section 4.6 Reports and Lists.

Operation:

The operation is shown in Fig. 4-3-1 and 4-3-12.

4.4.5.7 Protocol Dump List

Function:

The function allows the operator to print out the protocol dump list manually.

 

A brief description of "Protocol Dump List" will be given in section 4.6 Reports

 

and Lists.

Operation:

The operation is shown in Fig. 4-3-1 and 4-3-12.

4.4.5.8 Log Report

 

Function:

The function allows the operator to print out the log report manually when

 

Service-Bit=ON. This information is used by Okidata.

Operation:

The operation is shown in Fig. 4-3-1 and 4-3-12.

4.4.6Selection of Counter Display

4.4.6.1 Drum Counter Display

Function: When I/D unit reaches run-out time, "CHANGE DRUM SOON" is appeared in LCD. Under above condition, user can see the Drum message and clear. However, No. of counter is not shown for user (Service-Bit=OFF)

After user changed the Drum and clear operation, "CHANGE DRUM SOON" in LCD is disappeared.

However, the drum counter clear is possible even if the drum is not at the end of its lifespan.

40672201TX Rev.4

4 - 26