6.8Recording Paper Skewing
The maximum allowable skew of the recording paper is ±1 mm over any advance of 100 mm.
6.9Copy Density
The density of a black image printed on plain paper will be greater than 1.2 O.D.* regardless of uniformity in all printing areas. The density of the white background (unprinted area) will be no greater than 0.2 O.D. unit. All density measurements will be referred to a McBeth RD914 Densitometer.
* : 1.2 O.D. is guaranteed within the range shown in Figure
*Note: | O.D. of 1.2 or more (at 10 cm position after the test pattern print started). |
| Measured 30 min. after the test pattern print started. |
6.10Copy Uniformity
Printed copies will exhibit a uniform density of printed and background areas, within a varia- tion of 25% units from edge to edge of a single copy and within a variation of 30% units from one copy to the next.
6.11Copy Stacking
The machine will discharge printed copies and stack them without jamming providing the paper sizes are A4, Letter and Legal.
Copies will be stacked in the order in which they are printed without operator intervention and the stacking mechanism will have a capacity of * 30 copies maximum.
The printed copies will be discharged on the stacker with printed face up.
*Note: 1) Using the recommended paper.
40672201TX Rev.4 | 6 - 5 |