10.4Copy Resolution
The resolution of the received copy will be as follows:
Scanning: | 200* dots/inch x 3.85 lines/mm or 300 dots/inch x 7.7 lines/mm or 15.4 lines/mm |
| * : Convert from 300 to 200 |
Printing: | 300 dots/inch x 784 lines/inch |
Note : The image smoothing process is used for printing.
Resolution will be measured by transmitting a IIEEJ No. 2 Test Chart or equivalent between two machines and measuring the resolution of bar patterns.
10.5Readability
Test Chart:IIEEJ No. 2 chart.
1. | Readability (pattern 7) | |
| (Ex.) | At No. 3 in pattern 7, more than six should be read from eight of the received |
|
| copies in standard mode. |
|
| At No. 4 in the same as above, more than six should be read from the received |
|
| copy in fine mode. |
2. | Readability (pattern 15 characters) | |
| (Ex.) | The characters on the received copy of 10.5 points should be readable at more |
|
| than 28 characters in FINE mode. |
|
| The received copy should be generated by the same model as TX. |
3.Tapered Lines (horizontal)
(a)Black tapered line on a white background:
(Ex.) The black line should be printed less than 0.1.
(b)White tapered line on a black background:
(Ex.) The white line should be distinguished less than 0.2.
4.Tapered Lines (vertical)
(a)Black tapered line on a white background:
(Ex.) The black line should be printed less than 0.2.
(b)White tapered line on a black background:
(Ex.) The white line should be distinguished less than 0.3.
Note: Final agreement should be made after QA meeting between Customer and OKI (to determine the criteria etc.).
40672201TX Rev.4 | 10 - 2 |