Function:

To enable H or L or disable the line monitory sound.

 

In case setting H/L, monitor is enable for 5 seconds after dialing.

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

4-3-18.

07: Buzzer volume selection (LOW/MID/HIGH)

Function:

Selects the sound volume of each of the key touch tone, end of communi-

 

cation buzzer, voice request buzzer and off-hook alarm from the low,

 

medium and high levels.

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

4-3-18.

08: Default arrangement for closed network (OFF/ T/R /RX)

Function:

To disable or enable (OFF) the access to the FX-048/050VP175VP from

 

stations which are not registered in one-touch key or two digit auto dial

 

code.

Operation:

The operation for setting of the default position is described in Fig. 4-3-17

 

and 4-3-18.

09: Default arrangement for TX mode

Function:

To select the mode automatically set up when a document is loaded in the

 

feeder.

 

The following combinations are selectable.

 

STD/NORMAL

STD/DARK

 

 

 

STD/LIGHT

 

 

 

FINE/NORMAL

 

FINE/DARK

 

 

 

 

 

 

 

 

 

 

 

 

EX.FINE/DARK

 

 

 

EX.FINE/NORMAL

 

 

 

 

FINE/LIGHT

 

 

 

 

 

 

 

 

 

 

 

 

EX.FINE/LIGHT

 

 

PHOTO/NORMAL

 

 

 

 

PHOTO/DARK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHOTO/LIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operation: The operation for setting of default position is described in Fig. 4-3-17 and 4-3-18.

10: Default arrangement for TEL/FAX switchover timer (20 sec/35 sec)

Function:

To specify the time for which the machine alerts you on reception of a call

 

in the telephone/fax automatic switchover mode.

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

4-3-18.

40672201TX Rev.4

4 - 30