4.2.12One-Touch Keys

Function: One touch keys are used for following purposes.

•single destination designation

•various functions for communication or registration

a)Single destination designation

When used for single destination designation, pressing each key causes the origination of a call to preregistered destination telephone number.

Following data registration is available for the single destination designa- tion.

Key number 1-10

•destination telephone numbers

•ID

•alternate destination telephone number

b)Various functions for communication or registration

Operator can select the various functions directly by using one touch key after pressing SELECT FUNCTION key. "SELECT FUNCTION (OT)" is displayed on LCD when one touch key can be used for various preprogramed functions.

example

SELECT FUNCTION (OT)

 

 

MEMORY AVAIL.= 100%

 

 

These assigned various functions are shown in Fig. 4-3-1 and Fig. 3-7 ~

Fig. 3-9 control panel.

Display: When pressed to dial select the distant station, the full-digit telephone number corresponding to the auto dial code assigned to the pressed key will show up on LCD display.

4.2.13HYPHEN

Function: This key has two functions.

1)Used as the "+" input key in registering TSI/CSI or Call Back Message.

2)Used as the "-" input key in registering One-touch/Auto dial Tel No. or ID to switch the PTT parameters.

40672201TX Rev.4

4 - 9