Function: To enable or disable MEM RX when toner low condition.

ON: To receive the message in the memory when the remaining toner level is low or none.

OFF: To print the message even the remaining toner level is low or none.

23: MEM full save

Function:

Broadcast transmission and other features originate calls after all the

 

documents read in the memory. When Memory Full occurs during

 

reading documents and operator time out occur, all the readout data must

 

be deleted (OFF setting) or all the data must be sent. (ON setting)

 

Select either ON or OFF setting as follows:

 

ON: Selecting display

 

OFF: Selecting delete at all times

Operation:

To operation for setting of default position is OFF in Fig. 4-3-18.

24: Continuous tone

Function:

Setting of sounding warning tone after reception.

 

ON: Warning tone sounding stops by operator's STOP key pressing

 

OFF: No warning tone

Operation:

To operation for setting of default position is OFF in Fig. 4-3-18.

25: Instant dialing

Function:

Setting to start reading documents upon call origination when transmitting.

 

Refer to attached table "Document Reading Timing". (Page 4-20)

Operation: The operation for setting of default position is enable in Fig. 4-3-18.

26: Restrict Access

Function:

To enable or disable restrict access function.

 

Restrict ID registration (Fig. 4-3-24) becomes effective when Restrict

 

Access is set to ON.

Operation:

The operation for setting of default position is disable in Fig. 4-3-18.

27: Width Reduction

Function:

Performs the reduction of the horizontal scanning. (However, only when

 

printing of Copy/reception message.)

 

See section 4.7.2.1 Variable (reduction) printing.

Operation:

The operation for setting of default position is desable in Fig. 4-3-18.

40672201TX Rev.4

4 - 33