2.2General Function Specifications

General function specifications for the product are given below. They are summaries of whole descriptions. For convenience of description, the functions are classified in two categories:

User functions and Service functions.

2.2.1User functions

1)Transmissions

Transmission is available by auto dial (10 one-touch numbers, 70 two-digit numbers, as well as standard keypad dialing).

2)Reception

Reception is available by auto reception and manual reception.

3)Dual access

The machine can scan another document into document memory during memory TX/ RX and paper reception.

4)Voice request

A voice request from the transmitter is available only upon completion of the total message transmission.

A voice request from the receiver is available at the end of each page being received. A voice request function is available in normal transmission and normal reception. (refer to Table 4-x)

5)Auto redial

If a call cannot be connected to the distant station because the line is busy or no answer is returned, this feature redials the same station after a predetermined interval. The redial interval and the number of redial tries are set by the user in the US/ CANADA version and in some INT’L versions where allowed by the PTT, and by a service engineer in other INT’L versions.

If a communication terminates with an error in memory TX mode (no response to POST-COMMANDS) the machine re-dials and re-transmits from the first page to the same station.

40672201TX Rev.4

2 - 7