4.9New Functions and changed operations4.9.1300DPI functionFor FAX communicationFor Local copy and PC scan in horizontal resolutionFor Printer4.9.1.1 TX mode

When EXTRA FINE mode is selected, the machine will transmit in the following resolution.

[Transmit resolution][Remote RX machine’s ability]
300 x 300 DPI

300

DPI and EX. FINE are available
8 dots/mm x 15.4 lines/mm

300

DPI is not available, EX. FINE is available
8 dots/mm x 7.7 lines/mm

300

DPI and EX.FINE are not available

In case the machine has no learning function data (not memorize the resolution ability data of remote machine), the machine will be activated in FINE even if the EXTRA FINE mode is selected.

In case the memorized learning data and remote machine’s ability are not matched, the TX machine will convert the scanned data to the remote machine’s ability and send it without error.

4.9.1.2RX mode

In reception mode, TX side machine will automatically fit the data to receive preferably and print it out.

4.9.1.3COPY mode

When the operator selectes EXTRA FINE, the machine will make copy in 300 DPI x 15.4 lines/mm resolution.

In case the operator selectes FINE, the machine will scan in 300 DPI x 7.7 lines/mm resolution. In case the operator selectes STD, the machine will scan in 200 DPI x 3.85 line/mm resolution.

4.9.1.4PC scanner mode

Machine works as 300 DPI scanner of PC by using attached scanner driver and application software which are provided by OKIDATA.

For details, please refer to appendix “MFP product specification”.

40672201TX Rev.4

4 - 56