Pressing the START key will cause the machine to seize the line and start dialing to the exchange. Fig. 4-4-6 shows AUTO START ON in parenthe- ses, which denotes that there is the case in which the operator does not need to press the START key when "AUTO START" is enabled.

The message corresponds to " " shown in Figure 4-4-6.

OKI TAKASAKI

DIALING

The dialed digits is shown into the top message line of the LCD as:

0273 56 7890 DIALING

When the machine has completed dialing, the message on the LCD will be changed to:

0273 56 7890 CALLING

The machine proceeds to send the message which is identified by the "ONE-TOUCH" block shown in Fig. 4-1-1.

Assuming the call is answered, the operator may hear the CED tone returned from the distant station through the built-in speaker.

Auto-Dial Code Dialing

Assuming the handset on hook, the operator first taps AUTO DIAL key. The machine responds to the command and displays the following message on the LCD:

AUTO DIAL NO. ?[_ ]

ENTER 01-70

As an assumption, the desired telephone number has been assigned to AUTO DIAL 01. Then, the operator taps "01" and the message will be on the LCD:

OKI HONJYOU

YES(START) NO(LOC.)

The message corresponds to " " shown in Fig. 4-4-6 because "AUTO START" is disabled and the call is originated on hook. The operator taps the START key.

40672201TX Rev.4

4 - 17