TYPE2 : Real time dialing is available when the optional hand set is OFF-HOOK or press HOOK key.

08.TEL/FAX Switch (ON/OFF)

Switching the TEL/FAX automatic switch function

09.MDY/DMY (MDY/DMY for US/CANADA version. MDY/DMY for INT'L version) Refer to Table 4-7.

Switching LCD display and report print from month/day/year to day/month/year.

10.Long Document Scan (ON/OFF)

Switching the function of scanning long-size documents (more than 360 mm).

ON : 1500 mm or 60 min.

OFF : 360 mm or 60 min.

11.Tone for Echo (ON/OFF)

Switching this function applicable to poor circuit quality of overseas transmission, etc. Note: Both ignoring 1st DIS (No. 14) and protective tone (No. 16) are switched at the

same time in setting of one-touch key parameter.

12.MH only (ON/OFF)

Switching the function of limiting image compression to the MH code.

13.H/MODEM RATE (14.4 k/9.6 k/4.8 k) Selection of H/MODEM RATE for TX/RX

14.T1 (TX) Timer Value (010 - 255)

Registers the time duration (in seconds) for which FX-051 waits for the remote station's answer. This timer starts when the last dial digit has been sent in the automatic trans- mission mode.

15.T1 (RX) Timer Value (010 - 255)

Registers the time duration (in seconds) for which FX-051 waits for the remote station's answer. This timer starts when the automatic reception is started.

16.T2 Timer Value (001 - 255)

Registers the time duration (in seconds) for which FX-051 watch for the EOL interval. This timer starts when the last EOL has been received.

(in 100 ms steps)

17.DIS BIT 32 (ON/OFF)

To enable or disable the DIS BIT 32. Refer to 4.8.14.

40672201TX Rev.4

4 - 39