17: Memory TX/Feeder TX switch

Function:

To select the transmission mode (MEM. TX/FEED. TX) of default.

 

This function becomes effective when Instant Dial of No. 26 is set to OFF.

 

(Refer to P.4-20 Document reading timing)

Operation:

Refer to Fig. 4-3-18.

18: Default arrangement for power save mode (ON/OFF)

Function:

To enable or disable the power save.

Operation: The operation for setting of default position is described in Figure 4-3-17, Fig. 4-3-18 and Table 4-6.

Note:

No setting for ODA version

19: Default arrangement for ECM function (ON/OFF)

Function:

To enable or disable the ECM function.

Operation: The operation for setting of default position is described in Figure 4-3-17, Fig.4-3-18 and Table 4-6.

20: Default arrangement for remote diagnosis (ON/OFF)

Function:

To enable or disable the access to this machine from the remote center

 

for diagnosis.

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

Fig. 4-3-18.

21: Default arrangement for PC/FAX switch (ON/OFF)

Function:

To enable or disable PC interface function.

 

When PC reception is not available, for example, application is not

 

activated on the PC or cable is missing between PC and fax etc., this

 

setting allows to switch from PC to fax reception automatically.

 

ON: Automatically change to fax reception

 

OFF: No reception

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

Fig. 4-3-18.

22:No toner MEM RX

Changing from service function setting to user function setting.

40672201TX Rev.4

4 - 32