4.4.7.4 Function Programming

Default table is shown in Table 4-6.

Operation:

The operation is shown in Fig. 4-3-1, 4-3-17 and 4-3-18.

01: Default arrangement for message confirmation report (Single location) (ON/OFF)

Function:

To enable or disable the automatic message confirmation printout after a

 

single location call.

Operation:

The operation for setting of default position is described in Figure 4-3-17

 

and 4-3-18.

02: Default arrangement for message confirmation report (Multiple location) (ON/OFF)

Function:

To enable or disable the automatic printout of the multiple polling recep-

 

tion and the broadcast.

Operation: The operation for setting of default position is described in Figures 4-3-17 and 4-3-18.

03: Default arrangement for error report MCF (ON/OFF)

Function:

To enable or disable the automatic printout of the error report when error

 

in communication is detected.

Operation:

The operation for setting of default position is described in Fig. 4-3-17 and

 

4-3-18.

04: Default arrangement for image in MCF (ON/OFF)

Function: To enable or disable the image in MCF.

Operation: The operation for setting of default position is described in Figure 4-3-17 and 4-3-18. Refer to 4.9.7 Image in MCF.

05: Default arrangement for sender ID (ON/OFF)

Function:

To enable or disable the sender ID.

Operation: The operation for setting of default position is described in Figure 4-3-17 and 4-3-18.

06: Monitor volume selection (H/L/OFF)

40672201TX Rev.4

4 - 29