When the machine has completed dialing, the message on the LCD would change to:

001160977484184 CALLING

The machine proceeds to send the message which is identified by the "KEYPAD DIAL" block shown in Fig. 4-1-1.

Destination ID search dialing

Any registered destination ID can be searched and direct dialing to the destination, having the searched ID, is possible. Searching by entering the all characters of the destination ID is possible, and searching through all destination IDs is also possible.

(Operation)

The operation explained below as an example is for the search of the destination ID, "OKI-TOKYO".

(1)Manual search dialing mode

Press the SEARCH key. As the first character is O, press 6 on the key pad. Since M, N and O are assigned to the 6 key, the LCD displays a destination ID beginning with M and its dial number as follows:

MINESOTA OFFICE 987654321

As the 6 key is pressed repeatedly, the LCD will display.

OKI-TOKYO 814542111

Pressing the START key in this state causes direct dialing to that destination.

(2)Auto search dialing mode

Press the SEARCH key twice. As the SEARCH key is pressed repeat- edly from this state, the LCD will display the destination ID's in the lexicographical order one at a time, each time the SEARCH key is pressed as follows:

40672201TX Rev.4

4 - 19