Pressing the START key will cause the machine to seize the line and start dialing to the exchange. Similar to the case of One-Touch Auto Dialing, Fig. 4-4-6 shows AUTO START ON in parentheses, which denotes that there is the case in which the operator does not need to press START when "AUTO START" is enabled.

OKI HONJYOU

DIALING

After checking dial tone or elapse time of waiting, all the digits for dialing will be appeared into the top line of the LCD as:

0495 22 2111 DIALING

When the machine has completed dialing, the message on the LCD would change to:

0495 22 2111 CALLING

The machine proceeds to send the message which is identified by the "TWO-DIGIT AUTO DIAL CODE" block shown in Fig. 4-1-1 Assuming that the call is answered, the operator may hear the CED tone returned from the distant station through the built-in speaker.

Keypad dialing

Assuming the handset is on hook, the operator can immediately tap the first digit, "0" in this example case. The machine responds to the command and displays the following message on the LCD.

0

Thereafter, the operator simply continues to entry the remaining digits in the telephone number.

00116097784184

The message is shown in Fig. 4-4-6. Upon completion of the entry of the telephone number, the operator taps the START key.

001160977484184 DIALING

40672201TX Rev.4

4 - 18