
10.1Mean Time Between Failures (MTBF)
The MTBF for the overall machine will exceed (3,000) hours of actual operation. The MTBF will be measurable at a confidence level of 95 percent under controlled laboratory conditions.
The MTBF will be based on 50 percent transmit and 50 percent receive activity.
10.2Standardization
The machine will meet all specifications established by the 1996 version of
Recommendation T.4 - Group 3
Recommendation T.30 - Procedures
10.3Image Transmission Time
The time required to send a
Table
|
|
| ||
|
|
|
| |
| Procedure | Initial | 12.0 sec.(V17/29) | |
| Intermediate | 2.5 sec.(V17/29) | ||
G3 | Time | |||
Final | 4.0 sec.(V17/29) | |||
Basic |
| |||
|
|
| ||
| Image | 14400 Standard 8.0 sec. | ||
| Time | Fine | 11.0 sec. | |
|
|
|
|
Note: The above table shows the values under the following conditions:
• Sender ID: | ON |
•Speed protocol: OFF
•Feeder TX mode
*In the case of auto answer. Measured from the time of Answer.
In the case of another chart being applied, the above specified times will not be applied.
40672201TX Rev.4 | 10 - 1 |