4.2.6Auto Dial

Function: When pressed, will identify to the machine that the 2-digits code which follows is an auto-dial code registered in advance.

A total of 70 locations numbered can be programmed.

The operator can use AUTO DIAL with the external handset both on hook and off hook.

Display: When pressed, a guidance message will appear on LCD display, prompting the operator to enter a 2-digits auto dial code.

4.2.7Keypad

Function: Twelve keys on the keypad function the same as those of a conventional keypad provided on regular telephone instruments. Numeral keys represent 1 to 0, inclusive, and “*” and “#,” the corresponding symbols. The operator can use them for:

1)Directory dialing the full-digit telephone number and ID registration to select a distant station.

2)Assignment of a full-digit telephone number to an auto dial code.

3)Entry of numerical data in the course of programming certain user functions (for example, report printouts, Date and Time adjustment, Sender ID selection, etc.).

4)Designation of the first character of the destination ID as the search object in search dialing.

5)Registration of machine ID, TSI

Display: When a key is pressed, the numeral or symbol corresponding to the pressed key will show up on LCD display.

4.2.8REDIAL

Function: Directs the machine to redial the same telephone number used in the previous call which failed connection to the called station by some reason (for example, line busy, no answer, etc.).

This feature is called “Manual Redial,” and made effective immediately every time

Note: After restoration of power, the machine cannot return to previous operation condition before the power failure. Restoration of power means that the voltage returns to the normal value after power failure. Since the registered data for redial is lost by power failure, the manual redial is not available by the past data after power failure.

40672201TX Rev.4

4 - 6