Printer alarm (Printer I/F abnormal, engine error, fan alarm, and fusing unit error)

cover open

Recording paper jam or printer alarm shall be reset by opening the cover or by power off and on after remedying the cause. It is necessary to press the STOP switch in addition in case of a paper jam.

Fig. 4-4-10 shows the LCD display messages in alarm states.

4.2.17 LCD display

Type:

LCD (Liquid Crystal Display) Panel.

Function: Indicates short messages which identify the current status of the machine during message transmission or which guide the operator to the next step during various operation and function programming procedures.

The display is capable of indicating two rows of 20 characters. The basic design concept is such that the top row should show the current or immediately preceding status of the machine, and that the bottom row should indicate the next step to take or the resulting current status - however, it should be noted that there are exceptions in this design principle.

When the machine is in standby, the top row of LCD will display current Time for no document and current Data and Time for document on feeder.

The detail of guidance messages will be introduced in Sections 4.3 "Typical

Operations," 4.4 "User Functions," and 4.5 "Service Functions".

4.3Typical Operations

This section provides information regarding the typical operations of the product, which includes:

Power Turned On (See Fig. 3-8 and section 4.3.1 for the location of the power switch)

Paper loading (See Fig.3-2)

Typical Transmission - (See Fig. 4-1-1 and 4-4-6)

Typical Message Reception - Auto Mode and Manual Mode (See Fig. 4-1-2 and 4-4-5)

Other Transmission Function (See Fig. 4-3-7 to 4-3-11 and 4-3-14 to 4-3-16)

By going through the description of these typical operations, the reader should be able to have a general idea of how the machine operates and also become familiar with the terms used in the subsequent descriptions regarding User Functions and Technical Programming.

40672201TX Rev.4

4 - 11