This section explains a protocol required to report a sending destination or requested Web page address from the FX051 to the FAX2NET server.
5.1Telephone Number
The figure below shows a procedure when the sending destination is a telephone number.
FAX2NET server
FX051 |
| FAX2NET server | |
DIAL |
|
|
|
|
|
|
|
TA
Digit ‘A’
Account number +‘*’
Destination FAX number +‘*’
Checksum +‘*’
TB
Digit ‘B’
TC
CED/NSF/CSI/DIS | T.30 protocol |
-TA < 10 sec.; TB < 6 sec. TC < T0 timer set value. At TA or TB timeout, the service code is 14D0.
-The length of each DTMF tone is 300 ± 25ms. The time between digits is 100ms min. and 5 sec. max.
-The Account number, destination facsimile number, and check sum are delimited by DTMF tone “*.”
-For details on check sum, see Section 5.5.
-When the FAX2NET server issues digit “D” instead of digit “B,” the request is rejected. In this case, disconnect the line smoothly.
-After digit “B,” CNG need not be issued from the facsimile.
40672201TX Rev.4 |