Omnitron Systems Technology RS-232 Code ID Definition Group, Enter one character for the new ID

Code ID Definition (Group I)

If the Code ID option is enabled in General Setup, the user can select the character used to identify each symbology.

1.Enter CODE ID DEFINITION SETTINGS MODE by typing /E/D/FI.

2.Press <ENTER>. The reader should beep twice.

3.Enter the characters in the left column to select the symbology.

4.Press <ENTER>. The reader should beep twice.

5.Enter one character for the new ID.

a	UPC-A	Default = a
b	UPC-E	Default = b
c	EAN-8	Default = c
d	EAN-13	Default = d
e	Code 39	Default = e
f	Interleaved 2 of 5	Default = f
g	Industrial 2 of 5	Default = g
h	Code 128	Default = h
i	MSI/Plessey	Default = i
j	Codabar	Default = j
k	MSR Track 1	Default = k
l	MSR Track 2	Default = l
m	MSR Track 3	Default = m
n	Telepen	Default = n

6.Press <ENTER>. The reader should beep twice.

7.Save the change and exit the group setup mode by entering IZ<ENTER>. The reader should beep four times.

Note: To review the group’s current setting(s), type IY<ENTER> while in the Group Setup Mode. To reset the current setting(s) to its group default, type IX<ENTER> while in the Group Setup Mode.

EXAMPLE:

To change Code ID for Code 128 from h to w, enter: /E/D/FI<ENTER>h<ENTER>w<ENTER>IZ<ENTER>

9