Omnitron Systems Technology RS-232 MSI/Plessey Settings, Telepen Setting, Enable/Disable Telepen

MSI/Plessey Settings:

Enable/Disable MSI/Plessey

If enabled, MSI/Plessey symbology will be read, subject to the reading restrictions specified by this set of options. If disabled, the data from the sym- bology will be disregarded.

SELECTION CODE: F7
MSI/Plessey Enable	A
MSI/Plessey Disable	B

Check Digit

The MSI/Plessey symbology requires a check digit, and can optionally have two check digits. The reader can either send the check digit(s) as part of the data, or strip it before transmission to the host.

SELECTION CODE: F7

Send Check Digit	C
Do Not Send Check Digit	D

Select only one of the following check digit schemes:

SELECTION CODE: F7

One Mod 10 Check Digit	E
Two Mod 10 Check Digits	F
Mod 10/Mod 11 Check Digits	G

Telepen Setting:

Enable/Disable Telepen

If enabled, Telepen symbology will be read, subject to the reading restrictions specified by this set of options. If disabled, the data from the symbology will be disregarded.

SELECTION CODE: F8
Telepen Enable	A
Telepen Disable	B

Numeric / ASCII Mode

If set to Numeric Mode, each original Telepen code will be translated into 2-digit numeric pair. Otherwise, ASCII or Numeric data will be sent out accor-ding to the AIM specification.

SELECTION CODE: F8
Numeric Mode	C
ASCII Mode	D

21