Set the Sequence in which Data Fields are Sent
This command specifies the order in which data fields are transmitted to the host. Each separate field is assigned an upper case alpha letter in the order in which it is created. So the first data field created is A, the second is B, and so on.
SELECTION CODE: JK
Characters Assigned to Data Fields in the Transmission Order Desired
EXAMPLE:
To transmit fields A, B, and C to the host so that the second and third data fields are reversed, enter:
... JK<ENTER>A<ENTER>C<ENTER>B<ENTER> ...
This means that data fields A, B, and C will be transmitted as A, C, and B.
Time Delay
In addition to specifying the order in which data fields are transmitted to the host, you can add a time delay between each field. The amount of time delay is two digits multiplied by 100 milliseconds. So if the time delay specified is “02” the time delay will be 200 milliseconds.
SELECTION CODE: JM
Two Digits for Time Delay
Delete One Formula
This command deletes a single formula stored in the reader’s memory. To do this, you need to know the place the formula is stored in memory. In other words, if the formula to be deleted is the third formula stored in the reader’s memory, then you’ll need to enter the number 3.
SELECTION CODE: JS
One Digit to Indicate which Formula to Delete
39
