Read Two-Digit Addendum
If enabled, the reader will decode the two-digit secondary symbol when it is scanned with the primary symbol, and add the data to the end of the transmis- sion. If not, any two-digit secondary symbol will be ignored.
SELECTION CODE: G2 | |
Read Two-Digit Addendum | I |
Do Not Read Two-Digit Addendum | J |
Read Five-Digit Addendum
This option operates in the same manner as the Read Two Digit Addendum option except it enables the reading of a five digit secondary symbol.
SELECTION CODE: G2
Read Five-Digit Addendum | K |
Do Not Read Five-Digit Addendum | L |
Addendum Required
If a two or five-digit addendum is enabled, then enabling this option will require an addendum be present before a good read is registered. If not, then symbols with and without the addendum will be accepted.
SELECTION CODE: G2 | |
Addendum Required | M |
Addendum Not Required | N |
Add Separator Space
This option is used with the Two and Five-Digit Addendum options. If en- abled, an ASCII space character is inserted between the data decoded from the primary UPC symbol and the addendum symbol.
SELECTION CODE: G2 | |
Add Space Separator | O |
Not Add Space Separator | P |
