Outback Power Systems 80 user manual Auto Mode, Eq Interval

AUTO MODE

COUNT	EQ INTERVAL	Use the <-DAY>and <+DAY> soft keys to preset the
		interval day to initiate an automatic equalization cycle.
00	000	The EQ INTERVAL displays the number of days in the
		interval between cycles and COUNT displays how many
EXIT	-DAY +DAY	days of the interval have passed. To view the MAIN EQ
		screens, press the <EXIT> soft key.

NOTE:

•Auto Mode initiates when a preset interval day (1-250 days) is reached.

•The default equalize interval (EQ INTERVAL) setting is 000 day leaving the auto eq disabled.

•EQ-MPPT display indicates the FLEXmax 80 is trying to reach the target equalize set point.

•The equalize time EQ 0:00 in Hours:Minutes displays after the equalize set point is reached.

•An incomplete equalization cycle continues into the next day unless the FLEXmax 80 is powered off or manually stopped. The remaining EQ time can be viewed in the Stats Menu.

•The COUNT value will be cleared to 000 when an EQ is started, manually stopped, or FLEXmax 80 has been powered off.

•After recharging, an EQ DONE message displays and a Float cycle begins. EQ DONE is displayed until

(1) any soft key is pressed or (2) a new day occurs for systems using an OutBack MATE.

BATTERY EQUALIZE

Volts 15.0

EXIT NEXT -EQV +EQV

Charger		Aux		Light
Eq	GMisc		Advanced
Logging		Stats
EXIT	F		G	GO

Press the first soft key twice to return to theMAIN Menu.

Press the < > soft key until the G is in front of Misc. Press the <GO> soft key to view the Misc screen.

42