GT | State | PWM% | ChgT |
|
255 | 07 | 50.0 | 005 | Press the <NEXT> soft key to view the FORCE FLOAT, or |
|
|
|
| |
|
|
|
| BULK screen. |
EXIT | NEXT |
| RSTRT |
|
|
|
|
| Pressing the <FLOAT> or <BULK> soft key forces the | |
|
|
|
| FLEXmax 80 to that specific recharging cycle and returns | |
| FORCE | to the STATUS screen. Forcing a FLOAT or BULK recharge | |||
| will end an EQ cycle. Press the <NEXT> soft key to view | ||||
EXIT NEXT FLOAT BULK | |||||
the third MISCELLANEOUS screen. | |||||
|
|
|
| ||
|
|
|
| • Force FLOAT = float cycle | |
|
|
|
| • Force BULK = bulk cycle | |
|
|
|
| ||
|
|
|
| ||
This is the assigned number representing | Btmp is a battery temperature sensor reference | |||
the temperature of the internal components | value used to compensate the charging voltage. | |||
to control the cooling fan. The lower the | This is an arbitrary number between 0 and 255 | |||
number, the higher the temperature. 25° C is | and is not the actual temperature. An ‘X’ next | |||
approximately a value of 525. |
| to this value indicates a Global external RTS is | ||
|
| being used (system with a HUB and MATE). | ||
PCB | Target | Btmp | CFB | The output value of the |
internal current sensor is | ||||
512 | 14.4v | 255 | 0712 | used to calculate output |
The target voltage the |
|
|
| |
|
|
| amps, watts, and track | |
controller is trying to reach. EXIT | BACK |
|
| |
|
| the Maximum Power | ||
Point of the array.
Press the <EXIT> soft key twice to return to the MAIN
MENU.
44
