Useful playback functions (continued)
Clip skip
1 Press (pause) during playback to set the unit to the pause mode.
2 Push the Operation lever in the (rewind) or
MULTI / | REC | A.DUB | + |
- VOL | |||
|
|
| |
/REW | PL AY | FF/ |
|
STILL A DV | PAUS E | STILL A DV |
|
INDEX | S TOP | INDEX |
|
SELECT | VAR . |
| PB. |
|
|
On the remote control, press REW () or FF ().
Setting SEEK SELECT on the setting menu OTHER FUNCTIONS screen to CLIP&T allows you to cue the start of the clip and the position a text memo is attached in sequence. (Page 152)
Adjusting the volume
With the PAGE/AUDIO MON/VAR button, adjust the volume of the sound that is output from the internal speaker and headphone jack.
On the remote control, press the ZOOM/VOL button.
| DATE/ | PHOTO | START/ |
| STOP | ||
OSD | TIME | SHOT |
|
COUNTER | RESET | TITLE | ZOOM |
MULTI/ | REC | A.DUB | + |
- VOL | |||
|
|
| |
/REW | PLAY | FF/ |
|
Viewing images on a TV/monitor
You can view the images on a TV/monitor if you connect the unit to a monitor using a BNC cable (not included), an AV cable (not included), or an HDMI cable (not included).
1 Connect the
2 Start playback.
•To display the information shown in the viewfinder or on the LCD monitor on a TV set/monitor connected with an AV cable, press the OSD button on the remote control. Press the OSD button again to clear the display. However, information displayed on video that is output from SDI OUT and HDMI OUT is set with SDI & HDMI CHAR on the setting menu OUTPUT SEL screen, not the OSD button.
START/
DATE/ PHOTO STOP
OSD TIME SHOT
COUNTER RESET TITLE ZOOM
MULTI/
Checking the date and time
Press the DATE/TIME button on the remote control to show the date and time of shooting on the screen. The display changes as follows each time you press the button.
Time
Date |
| DATE/ | PHOTO | START/ |
| OSD | TIME | SHOT |
|
|
|
|
| |
Time and Date | COUNTER RESET | TITLE | ZOOM | |
| MULTI/ |
No display |
|
100