Viewfinder (continued)
Adjusting the screen display
1
2 Press the MENU button.
•For details on menu operation, refer to “Using the setup menus” (Page 28 of Vol. 1).
•You can also use the corresponding buttons on the remote control. For details, see “Description of parts” (Remote control). (Page 19 of Vol. 1)
3 Viewfinder adjustments
Select CHANGE under EVF SETTING on the setting menu DISPLAY SETUP screen.
LCD monitor adjustments
Set CHANGE under LCD SETTING on the setting menu DISPLAY SETUP screen.
• When adjusting the viewfinder
DISPLAY SETUP
EVF PEAK LEVEL | 0 | |
EVF PEAK FREQ | LOW | |
EVF SETTING |
| >>> |
EVF B. LIGHT |
| NORMAL |
EVF COLOR | ON | |
EVF MODE | AUTO | |
ZEBRA1 DETECT | 100% | |
ZEBRA2 DETECT | 85% | |
PUSH MENU TO RETURN
4 Push the Operation lever in the or direction to select the item.
• When adjusting the viewfinder
EVF SETTING
EVF BRIGHTNESS
EVF CONTRAST
PUSH MENU TO RETURN
5 Push the Operation lever in the or direction to make adjustment.
• When adjusting the viewfinder
EVF SETTING
EVF BRIGHTNESS
EVF CONTRAST
PUSH MENU TO RETURN
6 Press MENU three times to exit the menus.
•You can return the settings for EVF SETTING and LCD SETTING to the factory settings by selecting the item and pressing COUNTER RESET (if it is possible to change the item at that time).
•The viewfinder display can be in color or black and white. (See the setup menus, DISPLAY SETUP screen, EVF COLOR.) The resolution is the same for both of them.
Changing backlight brightness
The brightness of the LCD monitor backlight can be adjusted between five different settings.
1 Select LCD BACKLIGHT from the setup menu DISPLAY SETUP screen.
2 Select and set a value in the range of +1 to
The greater the value the brighter the screen.
•This setting will remain saved even if the
•You can cycle through LCD BACKLIGHT values and switch backlight brightness by pressing a USER button to which “LCD B.L” has been assigned.
“Using the USER buttons” (Page 39)
8