Screen displays (continued)

Errors and warnings

Errors and warnings appear when something goes wrong with the camera-recorder or a P2 card malfunctions. If the problem cannot be solved by turning off the camera-recorder and turning it back on, try replacing the card and if that does not help, it may be necessary to consult your supplier.

1394

This error occurs in a 1394 connection or when signal faults occur.

1394 INITIAL ERROR: a connection error

1394 INPUT ERROR: an input error

1394 INPUT ERROR (OTHER FORMAT): (different input format)

COPY INHIBITED:

This indicates that a copy-guarded signal entered DV format input from the DVCPRO/DV connector.

CLIP DISCONTINUED

This message appears in one-clip recording mode when conformity errors occur in a complied clip and the next recording cannot be complied to the clip.

DIR ENTRY NG CARD

This message indicates that the directory on the card has become corrupted and that normal recording cannot be guaranteed if operation continues. Make a quick backup of card data and reformat the card.

EXTERNAL1394 DISCONNECT

This message appears when the menu option 1394 CONTROL in the OTHER FUNCTIONS screen is set to EXT and recording is attempted without connecting an external device to the DVCPRO/DV connector.

FAN STOPPED

The fan has stopped.

Turn the power off immediately, discontinue use, and contact your dealer.

FAN STOPPED HIGH TEMPERATURE Due to the fan stopping, the interior of the camera-recorder has become very hot. The power switches off automatically. Discontinue use and contact your dealer.

FORMAT ERR !

This indicates a P2 card that does not meet the P2 card standard.

INCOMPATIBLE CARD

This message indicates that the inserted card does not meet required standards and cannot be used.

LOW BATTERY

This message indicates that the battery is depleted.

PULL DOWN ERROR

Video pull-down sequence error in a mode such as 24P

REC WARNING

This is displayed during a recording error. Do the recording over. If this does not solve the problem, consult your supplier.

CARD ERR (1) (2) (1/2)

The number indicates the P2 card that is giving trouble.

•Turn the power off if the warning continues.

•If the warning persists after rerecording, replace the card with another card.

ERROR: Other causes

OVER MAX# CLIPS:

The limit for the number of clips that can be recorded to one P2 card (up to 1000 clips) is reached, and recording stops.

REC RAM OVERFLOW: Overflow of recording memory

RUN DOWN CARD

This message indicates that a P2 card has been overwritten the maximum number of times and that normal recording cannot be guaranteed if operation continues.

It is best to replace such P2 cards with a new card.

SYSTEM ERROR

This message indicates that a system error has occurred. This type of error can often be corrected by turning off the power and turning it back on again.

CAM MICON ERROR:

The microprocessor in the camera-recorder is not responding.

P2 CONTROL ERROR:

a P2 control error has occurred.

P2 MICON ERROR:

The P2 microprocessor does not respond.

CAN LENS ERROR:

a camera-recorder lense error has occurred.

126