Playback

Cannot play even when

• Is the PB/THUMBNAIL lamp on? If the CAMERA lamp

(Page 74)

I press the play button.

is on, press the POWER/MODE switch so that the PB/

 

 

 

THUMBNAIL lamp turns on.

 

 

 

• Have you selected a clip that cannot be played back (clip

(Page 78)

 

number is red)?

 

 

 

·· Clips with a different SYSTEM MODE (1080i, 720P etc.)

 

 

 

cannot be played back.

 

 

 

·· 24-bit audio clips (BITS PER SAMPLE is 24 in AUDIO of

 

 

 

CLIP PROPERTY) recorded with devices such as an AJ-

 

 

 

HPX3100 cannot be played back.

 

 

Images do not appear

• Make sure the input selector on your television is set to

 

 

on the television even

video input.

 

 

though I have connected

Read the television’s instructions carefully and select the

 

 

the camera-recorder

correct video input connector for the camera-recorder.

 

 

properly.

 

 

 

Cannot hear any sound

• You may have turned down the camera-recorder’s volume

(Page 100)

from the camera-

control too far.

 

 

recorder’s speaker.

Adjust the volume level using the PAGE/AUDIO MON/VAR

 

 

 

button+.

 

 

Cannot perform hot

• This unit does not support hot swap playback.

 

 

swap playback.

To replace one card with another during dubbing, stop the

 

 

 

dubbing first, and upon completing the replacement, resume

 

 

 

it.

 

 

Cannot perform clip

• Cannot copy when clips are continuously linked in ONE

(Page 86)

recording.

CLIP REC mode.

 

 

 

Select CAMERA mode and push the Operation lever in the

 

 

 

▼ direction (STOP) for 2 seconds to release the clip linking.

 

 

Other

Cannot read the data on

• Make sure the SD memory card is formatted correctly.

(Page 16)

the SD memory card.

If it is not, format the card in the unit.

 

 

The remote control does

• The battery in the remote control may have run out.

(Page 24 of Vol. 1)

not work.

If the remote control fails to work even if it is operated close

 

 

 

to the remote control sensor of the camera-recorder, it

 

 

 

means that the battery has run out. Replace it with new one.

 

 

 

• Make sure the remote control setting is the same for the

(Page 24 of Vol. 1)

 

remote control unit and the camera-recorder.

 

 

 

If the REMOTE setting is different on the remote control and

 

 

 

the camera-recorder, the remote control will not work.

 

 

There is a rattling sound

• There are some parts of the camera-recorder that make

 

 

when the camera-

a rattling sound in the PB/THUMBNAIL mode or when the

 

 

recorder is tilted back

POWER/MODE switch is OFF. This is normal.

 

 

and forth.

 

 

 

A clicking sound is

• This initialization operation is performed when the camera-

 

 

heard when the power

recorder starts up.

 

 

is turned on or when

It occurs due to the construction of the camera-recorder and

 

 

the PB/THUMBNAIL

is not indicative of any trouble.

 

 

mode is switched to the

 

 

 

CAMERA mode.

 

 

 

Reference

157