Setup menu list (continued)

RECORDING SETUP screen (continued)

Item

Setting

Notes

TC PRESET

Sets the initial time code.

 

 

• Set the frame value to 0 or multiples of 5 when shooting/

 

 

recording is set to 24P, 24PA, or 24PN.

 

 

If any other value, the recorded time code will mis-

 

 

match.

 

UB MODE

Sets the data recorded in the camera-recorder user bits.

 

 

USER, TIME, DATE, EXT, TCG, FRM. RATE

 

 

“Setting user bits” (Page 62)

 

UB PRESET

Sets the user information. Select USER in UB MODE.

 

ONE CLIP REC

Sets one-clip recording mode.

• Not available in the following

 

ON, OFF

conditions.

 

“One-clip recording (ONE CLIP REC)” (Page 47)

· When REC FUNCTION is

 

 

set to something other than

 

 

NORMAL.

 

 

· When REC SIGNAL is set to

 

 

1394.

 

 

· When VFR is set to ON.

START TEXT

Sets whether to automatically add a text memo at the

• Not available when REC

MEMO

recording start position each time you start recording.

FUNCTION is set to something

 

ON, OFF

other than NORMAL.

 

 

• The text memo that is added

 

 

when this is set to ON indicates

 

 

the recording start position.

 

 

For details on recording the text

 

 

memo as text information, refer

 

 

to “Setting of clip meta data”

 

 

(Page 87).

TIME STAMP

Determines whether or not date and time information will

 

 

be superimposed on the image.

 

 

ON:

 

 

Superimposes date and time information on the image.

 

 

OFF:

 

 

Does not superimpose date and time information on the

 

 

image.

 

 

<Note>

 

 

When DATE/TIME on the DISPLAY SETUP screen

 

 

is set to OFF, the date and time information is not

 

 

superimposed.

 

___indicates the factory setting.

142