Set the POWER/MODE switch to ON. (Page 25 of Vol. 1)
Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode (PB/THUMBNAIL lamp illuminates).
Press the MENU button.

Using SD/SDHC memory cards

You can use SD and SDHC memory cards (the term “SD memory card” is used for both hereafter) to save and load SCENE files and USER files, and to upload clip meta data. (Page 58)

Installing and removing the SD memory card

Installation

1 Push the OPEN lever of the P2 card slot cover downward () and slide to open ().

2 Insert the card while making sure it is oriented in the proper direction.

Access lamp

2

3 Close the P2 card/SD memory card slot cover.

Removal

1 Open the P2 card/SD memory card slot cover, and check that the access lamp is not lit.

2 Press the card further into the unit, grasp the card, and then remove.

3 Close the P2 card/SD memory card slot cover.

Formatting SD memory card

1

2

3

4 On the thumbnail menu, select OPERATION, FORMAT and then SD CARD. (Page 91)

• Select EXIT to cancel the formatting.

THUMBNAIL

 

 

 

 

 

 

DELETE

 

 

 

 

 

 

 

 

OPERATION

 

 

 

PROPERTY

 

FORMAT

 

SLOT1

REPAIR CLIP

 

META DATA

 

SLOT2

RE-CONNECTION

HDD

 

SD CARD

COPY

EXIT

EXIT

EXCH.THUMBNAIL

 

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

5 Select YES on the confirmation screen.

•The selected SD memory card is formatted.

•You can also format from the SD CARD FORMAT option on the setting CARD FUNCTIONS screen. (Page 150)

•With SDHC cards, 32 KB of capacity will have been used.

16