OTHER FUNCTIONS screen

Item

Setting

Notes

 

USER FILE

Saves user files to camera-recorder memory, loads them

• This setting cannot be made

 

 

 

into camera-recorder memory or initializes them. (Page 60)

when REC SIGNAL is 1394.

 

 

LOAD, SAVE, INITIAL

• Not available when compiling

 

 

• This does not affect options in the SCENE FILE screen.

to a clip in one-clip recording

 

 

 

mode.

 

REMOTE

Sets the operations of the supplied remote control unit.

 

 

 

 

“Remote control setup” (Page 24 of Vol. 1)

 

 

 

 

OFF:

 

 

 

 

Operations are not accepted from any remote control.

 

 

 

 

1:

 

 

 

 

Accepts commands from the remote control set for

 

 

 

 

“operation mode 1”.

 

 

 

 

2:

 

 

 

 

Accepts commands from the remote control set for

 

 

 

 

“operation mode 2”.

 

 

 

1394 CONTROL

Selects the method the camera-recorder uses for

• Not available in AVC-Intra

 

 

 

controlling external devices connected to the DVCPRO/

mode and DVCPRO HD native

 

 

DV connector. (Page 106)

mode.

 

 

EXT:

• Not available during interval,

 

 

Controls only the external device, but does not transfer

one-shot and loop recording.

 

 

data to the camera-recorder for recording.

 

 

 

 

BOTH:

 

 

 

 

BOTH: Controls both the external device and the camera-

 

 

 

 

 

 

 

 

recorder, and also records.

 

 

Menu

 

CHAIN:

 

 

 

When there is no more space left for recording in the

 

 

 

camera-recorder, recording is automatically made to the

 

 

 

 

external device.

 

 

 

 

OFF:

 

 

 

 

No control

 

 

 

1394 CMD SEL

Determines how recording is stopped when the camera-

• Not available in AVC-Intra

 

 

 

recorder controls an external device connected to the

mode and DVCPRO HD native

 

 

DVCPRO/DV connector.

mode.

 

 

REC_P:

• Not available during interval,

 

 

Engages REC/PAUSE status.

one-shot and loop recording.

 

 

 

 

 

 

STOP:

 

 

 

 

Stops recording.

 

 

 

ACCESS LED

Determines whether or not the P2 CARD ACCESS LED

 

 

 

 

should light.

 

 

 

 

ON, OFF

 

 

 

TALLY LAMP

Sets lighting of the tally lamp.

 

 

 

 

OFF:

 

 

 

 

The tally lamp does not light.

 

 

 

 

FRONT:

 

 

 

 

Front tally lamp (microphone side) lights.

 

 

 

 

REAR:

 

 

 

 

Rear tally lamp (viewfinder side) lights.

 

 

 

 

BOTH:

 

 

 

 

Both tally lamps light.

 

 

 

CLOCK SETTING

Sets the internal calendar (date).

 

 

 

 

“Setting the calendar” (Page 26 of Vol. 1)

 

 

 

___indicates the factory setting.

151