Thumbnail operations (continued)

2. Slot numbers and HDD status

This section indicates on which P2 card the pointed clip is recorded. The number of the slot that contains the appropriate P2 card is indicated in yellow. If the clip is recorded on more than one P2 card, then the numbers of all slots that contain the appropriate cards are indicated. The numbers of the other slots are shown in white if they contain P2 cards.

When the following P2 card is inserted, the slot number is displayed with a pink frame.

•RUN DOWN CARD

(A P2 card on which the maximum number of overwrites has been exceeded.)

•DIR ENTRY NG CARD

(A P2 card on which the directory structure is not supported.)

The USB HDD section is indicated as follows:

•Other than the USB HOST mode: gray

•Not connected in USB HOST mode: gray

•HDD recognized and usable in USB HOST mode: white

•HDD recognized and thumbnails shown in USB HOST mode: yellow

•HDD recognized and not usable in USB HOST: red

3.Time Display

You can set this to display the time code at the start of clip recording (TC), the user bits at the start of clip recording (UB), the shooting time (TIME), the shooting date (DATE), the shooting time date and time (DATE TIME), the clip name (CLIP NAME) or the user clip name (USER CLIP NAME).

•“Setting the thumbnail display mode” (Page 92)

4.Recording mode

The recording mode for the clip on which the pointer is located is indicated.

5. System format

The format for the clip on which the pointer is located is indicated.

6. Duration

The duration of the clip on which the pointer is located is indicated.

7. USB HOST mode indicator

Indicated when the mode has been switched to

USB HOST.

8. Clip Number

The numbers set by the camera-recorder for all the clips recognised correctly by the P2 card. These numbers are allocated in chronological order, by shooting dates and times.

If clips cannot be played because of different recording formats, they are displayed in red.

9. Defective Clip Indicator and Unknown Clip indicator

This marker is displayed for defective clips, which may result from a variety of causes, e.g., powering-down during recording.

Clip with yellow defective clip indicators can be restored in some cases.

• “Restoring clips” (Page 85)

A clip displayed with a red corrupt marker cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.

is displayed for clips such as those which differ in format from the P2 standard.

10. Incomplete Clip Indicator

Indicates that although a clip is recorded across multiple P2 cards, one of these cards is not inserted into a P2 card slot.

11. Shot Mark Indicator

This marker is displayed for a clip with a shot mark attached.

•“Shot mark” (Page 82)

12. Indicator for clips with proxy

This is displayed on clips for which proxy recorded on a proxy supporting P2 camera recorder such as an AJ-HPX3100 is attached.

13. Text Memo Indicator

This marker is displayed for a clip with a text memo attached.

14. Edit Copied Clip Indicator

This marker is displayed on a clip when the model supports edit copy, such as the AJ- HPM200. For more information about edit copying, see the instruction manual for a mode that supports edit copying.

15. Wide Clip Indicator

This marker is displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format.

16. Thumbnail Scroll Bar

Indicates which part of the whole thumbnail is currently being viewed.

78