1. PARTITION

This section indicates the type of the hard disk drive.

The available functions depend on the type of hard disk drive.

HDD type

Feature

Available functions

 

 

 

TYPE S

A special format that

Thumbnail viewing,

 

allows high-speed

writing and writing back

 

writing and writing back

on a card basis, writing

 

on a card-by-card basis.

back on a clip basis,

 

A drive formatted with

and formatting

 

the camera-recorder

 

 

uses this format.

 

P2

P2 STORE (AJ-

Thumbnail viewing,

STORE

PCS060G).

writing back on a card

 

No writing can be

basis, and writing back

 

performed.

on a clip basis

FAT

For a hard disk drive

Thumbnail viewing,

 

with the first primary

reading on a clip basis,

 

partition formatted in

and formatting

 

FAT 16 or 32, as seen

* Once formatted, the

 

on personal computers,

hard disk drive can be

 

etc., which requires a

treated as a TYPE-S

 

CONTENTS directory at

HDD.

 

its root.

 

OTHER

Hard disk drives not

Formatting

 

described above.

* Once formatted, they

 

* They are hard disk

can be treated as a

 

drives that have no

TYPE-S HDD.

 

CONTENTS directory or

 

 

use the NTFS and any

 

 

other file system instead

 

 

of FAT 16 or 32.

 

2. VENDOR

This section indicates the vendor for the hard disk drive.

3. MODEL

This section indicates the model of the hard disk drive.

4. SIZE

This section indicates the total storage on the hard disk drive.

5. USED

This section indicates the used space on the hard disk drive (in GB) and the number of P2 cards in use.

6. FREE CAP.

This section indicates the remaining free space on the hard disk drive in GB.

7. PARTITION #

This section indicates the partition number (one P2 card is used as a unit) on the hard disk drive.

The screen can show up to 10 partitions. If there are more than 10 partitions, push the Operation lever in the ▼ direction and scroll down to display the remaining partitions.

8. MODEL

This section indicates the model of the P2 card that originally contained data on the partition.

You can switch to PARTITION NAME by pushing the Operation lever in the ► direction. Push the Operation lever in the

◄direction to return to the original model name display.

9. DATE/TIME

This section indicates the date and time the data on the partition was recorded.

10. SERIAL

This section indicates the serial number of the P2 card that originally contained the data on the partition.

(Continued on the next page)

Editing

113