Using a hard disk drive (PC mode: USB host) (continued)
MISSING CLIP!
A shot mark will be added to the clips recorded on multiple P2 cards when all P2 cards are not inserted yet.
Insert all P2 cards with recorded clips, and
confirm that the 
incomplete clip indicators disappear, and then add shot marks.
NO CARD!
No P2 or SD card is inserted.
Insert compatible media.
NO COPY TO SAME CARD!
A clip cannot be copied to the card storing the original clip.
Copy the selected clip to a card that does not contain the original clip.
NO FILE!
The designated file is not found.
Check the file.
SAME CLIP IS SELECTED!
Images cannot be copied since the clip has already been copied from the original clip. Confirm the selected clip and release either the source clip or the destination clip and then execute the copy operation.
TOO MANY CLIPS!
The number of clips on the copy target card exceeds 1000.
Reduce the number of selected clips.
UNKNOWN CONTENTS FORMAT!
Warning displayed to indicate contents version mismatch.
Match devices and contents version.
UNKNOWN DATA!
The metadata character code is invalid. Use
USER CLIP NAME MODIFIED!
Characters in the clip name had to be deleted in adding the counter value.
The user clip name plus the counter value can only contain up to 100 bytes. Characters in the clip name are automatically deleted when the total exceeds 100 bytes.
WRITE PROTECTED!
The P2 or SD card is write protected. Insert
■Soft keyboard
Message
Description/Measure
CANNOT CHANGE!
[PERSON] will be entered while the text memo is not available.
Enter [TEXT] before entering [PERSON].
CANNOT SET!
INVALID VALUE!
The entered value is incorrect.
Change the value.
■HDD (USB HOST MODE)
Message
Description/Measure
CANNOT ACCESS CARD!
An error occurred during P2 card access. Check P2 card.
CANNOT ACCESS TARGET!
An error occurred during hard disk access. Check hard disk status and connection.
CANNOT FORMAT!
The hard disk cannot be initialized.
Connect another hard disk drive.
CANNOT RECOGNIZE HDD!
The destination target cannot be properly recognized.
Reboot the hard disk or connect a different hard disk.
CARD IS EMPTY!
CANNOT COPY!
The P2 selected for copying is empty. Copying is not performed since the card is empty.
FORMAT P2 CARD!
This warning indicates that data could not be imported from a hard disk to a P2 card because the P2 card contained recorded data. You cannot copy to a P2 card that contains data.
Format the card on a P2 device and copy again.
118