Thumbnail operations (continued)

Copying clips

Selected clips can be copied to the P2 card or SD memory card in the desired slot.

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Use the Operation lever to move the pointer to the desired clip and press the SET button on the Operation lever.

If recording using the one-clip REC function in which the clip can be combined with the previous clip (when “1*CLIP” is displayed), then copying of clips is not possible.

After changing to CAMERA mode, push the Operation lever in the ▼ direction (STOP) for approximately 2 seconds, and try again after ending clip linking.

3 Press the MENU button and select OPERATION → COPY from the thumbnail menu.

•Select Slot 1–2 or SD memory card as the destination.

•A YES/NO confirmation screen asks you to confirm that you want to copy the clip. Select YES with the Operation lever if you wish to copy the incomplete clip.

•Do not turn off the power or remove a P2 card while data is being copied. Doing so may cause the P2 card to fail. If you should accidentally perform one of the its operations, defective clips will be generated. Delete them, and then copy them again.

•When clips are copied to P2 cards, all the information on the clips is copied. However, when they are copied to the SD memory card*, video and sound information is not copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and real-time metadata.

•When there is insufficient recording capacity on the destination, the message “LACK OF REC CAPACITY!” is displayed, and copying will not proceed. When clips to be copied include some with defects, the message “CANNOT ACCESS!” is displayed, and copying will not proceed. If you attempt to copy the clips to the same card, “NO COPY TO SAME CARD!” is displayed and copy is not performed.

•To interrupt copying, press the SET button on the Operation lever. Clips currently being copied to the destination will be deleted.

•When identical clips exist on the destination card, the “OVERWRITE?” is displayed. Select “YES” or “NO”.

* Regarding SD memory cards to be used, see <Cautions in using SD memory cards> (Page 162).

86