SW MODE screen (continued)
Item | Setting | Notes |
| |
USER MAIN | Sets the function assigned to the USER MAIN button. |
|
|
|
| SPOTLIGHT, BACKLIGHT, ATW, ATWLOCK, S.GAIN, |
|
|
|
| D.ZOOM, Y GET, DRS, TEXT MEMO, SLOT SEL, |
|
|
|
| SHOT MARK, MAG A. LVL, LVL METER, PRE REC, |
|
|
|
| WFM, LAST CLIP, FBC, LCD B.L |
|
|
|
| “Using the USER buttons” (Page 39) |
|
|
|
USER1 | Sets a function assigned to the USER1 button. |
|
|
|
| The functions that can be assigned to this button are the |
|
|
|
| same as for the USER MAIN button. |
|
|
|
| BACKLIGHT (factory default setting) |
|
|
|
| “Using the USER buttons” (Page 39) |
|
|
|
USER2 | Sets a function assigned to the USER2 button. |
|
|
|
| The functions that can be assigned to this button are the |
|
|
|
| same as for the USER MAIN button. |
|
|
|
| TEXT MEMO (factory default setting) |
|
|
|
| “Using the USER buttons” (Page 39) |
|
|
|
USER3 | Sets a function assigned to the USER3 button. |
|
|
|
| The functions that can be assigned to this button are the |
|
|
|
| same as for the USER MAIN button. |
|
|
|
| DRS (factory default setting) |
|
|
|
| “Using the USER buttons” (Page 39) |
|
|
|
USER4 | Sets a function assigned to the USER4 button. |
|
|
|
| The functions that can be assigned to this button are the |
|
|
|
| same as for the USER MAIN button. |
|
| Menu |
| SLOT SEL |
|
| |
| “Using the USER buttons” (Page 39) |
|
| |
MF ASSIST | Automatically sets the last focus during manual focusing. |
|
|
|
| ON: |
|
|
|
| Automatically sets the last focus. |
|
|
|
| • The focus may not be set correctly if the last focus |
|
|
|
| differs considerably from the manually set focus. |
|
|
|
| • You cannot operate using the remote control connected |
|
|
|
| to the CAM REMOTE jack. |
|
|
|
| OFF: |
|
|
|
| The focus is not adjusted automatically. |
|
|
|
WFM | Selects the waveform displayed in the LCD monitor when |
|
|
|
| the user button to which WFM has been assigned is |
|
|
|
| pressed. |
|
|
|
| WAVE: |
|
|
|
| Displays a waveform. |
|
|
|
| VECTOR: |
|
|
|
| Vectorscope display |
|
|
|
| WAVE/VECT: |
|
|
|
| Each press of the button, switches the settings in the |
|
|
|
| following order: |
|
|
|
| OFF → WAVE (waveform) → VECTOR → OFF |
|
|
|
___indicates the factory setting.
139