Setup menu list

SCENE FILE screen

Item

Setting

Notes

LOAD/SAVE/INIT

Loads, saves and initializes settings of the scene file

• A change in scene files affects

 

assigned to the current scene dial position (one F1 – F6

only the scene file at the

 

scene file).

current scene dial position.

 

LOAD:

• This setting cannot be made

 

Loads data stored in camera-recorder memory.

when REC SIGNAL is 1394.

 

SAVE:

• Not available when compiling

 

to a clip in one-clip recording

 

Saves current values in camera-recorder memory.

 

mode.

 

INITIAL:

 

 

 

Returns settings to their factory defaults.

 

VFR

Enables or disables variable frame rate (VFR) mode at

• Not displayed when system

 

1080i or 720P.

mode is 480i/576i.

 

ON:

• This setting cannot be made

 

VFR operation

when REC SIGNAL is 1394.

 

OFF:*1

• Cannot be set when 1080i is

 

VFR off

selected with DVCPRO HD

 

recording and CAMERA MODE

 

 

 

 

is not set to 60i, 50i.

FRAME RATE

Adjusts the frame rate and exposure time at 1080i or

• Can only be set when VFR is

 

720P when VFR is on.

ON.

 

• 1080-59.94i:

• This setting cannot be made

 

1, 2, 4, 6, 9, 12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28,

when REC SIGNAL is 1394.

 

30 FRAME

• A change to 24 fps may

 

• 1080-50i:

cause the screen to flicker

 

momentarily.

 

1, 2, 4, 6, 9, 12, 15, 18, 20, 21, 22, 23, 24, 25 FRAME

 

 

 

• 720-59.94P:

 

 

1, 2, 4, 6, 9, 12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30,

 

 

32, 34, 36, 40, 44, 48, 54, 60 FRAME

 

 

• 720-50P:

 

 

1, 2, 4, 6, 9, 12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28,

 

 

30, 32, 34, 37, 42, 45, 48, 50 FRAME

 

SYNC SCAN

Selects synchro scan shutter display.

• Brightness may change when

TYPE

sec:

settings are switched.

 

Displays the shutter speed in fractions.

 

 

deg:

 

 

Displays the approximate shutter opening angle.

 

(SYNCHRO

Displays synchro scan shutter speeds to enable the

• Displayed in blue when not

SCAN)

operator to synchronize the camera-recorder to computer

set to synchro scan mode and

 

monitors.

when the SHTR/F.RATE dial

 

• This function only displays the shutter speeds. Use the

settings are not available.

 

SHTR/F.RATE dial to set a shutter speed.

 

 

• Set values (displayed values) are assigned to the

 

 

current scene file and manipulated using the LOAD,

 

 

SAVE and INIT functions.

 

 

“Setting SYNCHRO SCAN mode” (Page 50)

 

 

1/60.0 (AG-HPX250P)

 

 

1/50.0 (AG-HPX250EN)

 

DETAIL LEVEL

Adjusts the level of image outline correction (in horizontal

 

 

and vertical directions).

 

 

– 7 …0 *1… +7

 

V DETAIL LEVEL

Adjusts the level of correction in vertical direction.

 

 

– 7 …0 *1… +7

 

*1: The factory default when the SCENE FILE dial is set to F1.

___indicates the factory setting.

132