Using special recording modes (continued)

Precautions for one-clip recording mode

•This mode will not function when the interval recording, one-shot recording, loop recording, or VFR recording functions are selected.

•This mode will not function when the menu option REC SIGNAL is set to 1394.

•The menu and thumbnail operations are restricted as follows when combining to the clip. Push and hold the Operation lever in the  direction (STOP) for about 2 seconds to stop combining to the clip when switching to this mode.

··The following menu items cannot be changed.

SYSTEM MODE, REC SIGNAL, ASPECT CONV, CAMERA MODE, REC FORMAT, REC FUNCTION, 25M REC CH SEL

You can set VFR to ON even while continuing to link clips by using the SCENE FILE dial, SHTR/F.RATE dial, or the menu. When you do so, the compiling process is stopped, and a new clip will be created with each recording operation thereafter.

··The following Menu items, related to the reading/ writing of the SD memory card and reading of the settings file, cannot be executed. LOAD/SAVE/INIT in SCENE FILE, all options in CARD FUNCTIONS, USER FILE and MENU INIT in OTHER FUNCTIONS

··The following thumbnail menu items cannot be selected and executed.

OPERATION→COPY

•The processing time to complete the recording may take a little more time than normally to allow the clip to be combined with subsequent recordings.

•The fade process does not work on discontinuous audio during playback where the recordings are combined within the clip.

•If non-linear editing software is used on clips with multiple combined recordings, the software may not operate normally (as of Sep. 2011).

For the latest information on software that has been confirmed to work with these types of clips, visit the support desk at the following website.

http://pro-av.panasonic.net/

48