Press the MENU button to select
OPERATION → COPY.

Thumbnail operations (continued)

Using a text memo to break a clip and copy the necessary portion

1 Select a desired text memo in a clip by carrying out steps 1-3 for “Playing back a clip at the position where a text memo is recorded” (Page 83).

2 Move the pointer to the desired text memo, and then press the SET button on the Operation lever.

You can select more than one text memo.

3

4 User the Operation lever and SET buttons to select the destination slot. Then, select YES.

•Copying starts.

•The portion between the selected text memo and the next one is copied. If no text memo is found after the selected one, then all part after the selected text memo is copied.

•If multiple text memos are selected, the selected sections are copied.

•When the clip is being copied, the camera- recorder indicates the progress of the copy process and cancellation status. To discontinue the copy process, press the SET button on the Operation lever. Then, a YES/ NO confirmation screen is displayed. Use the Operation lever to select YES.

In clip division and copying using the text memo function, the area copied may be automatically modified depending on the recording format of the clip.

Deleting clips

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Push the Operation lever in the ◄ ► direction and position it on the clip you wish to delete. Press SET on the Operation lever to select the clip.

Multiple clips can be selected.

3 Press the MENU button and select OPERATION → DELETE from the thumbnail menu.

4 The following screen appears. Use the Operation lever to select YES.

The clip is deleted. All selected clips (in blue- green frames) are deleted by this operation.

To interrupt deleting, press the SET button on the Operation lever to cancel the operation. Partially deleted clips cannot be restored by canceling.

84