Thumbnail operations (continued)
Switching the thumbnail display
The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.
1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.
The thumbnail screen appears on the LCD monitor.
2 Press the MENU button.
The thumbnail menu appears.
MENU button
3 Select THUMBNAIL from the thumbnail menu.
Switch the thumbnail display by selecting one of the following items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips. At this time the thumbnails appear in selected order.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted in the specified slot.
When this item is selected, SLOT1 to SLOT2 are displayed as a
SETUP:
Please refer to “Setting the thumbnail display mode” (Page 92) for information about this item.
EXIT:
Close the
80