Playing back a clip at the position where a text memo is recorded

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Press the MENU button and select THUMBNAIL → TEXT MEMO CLIPS from the thumbnail menu.

The clip thumbnails with text memos attached are displayed in the upper section of the LCD monitor. The lower section of the LCD monitor shows information about the text memo on the clip selected by the pointer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thumbnail

 

Shows the still image that the

Display

 

text memo is related to.

Selected text memo clips (blue) and total clips (white)

3 Move the pointer over the clip that contains the desired text memo to playback and press the SET button on Operation lever. The pointer moves to the lower part of the LCD monitor.

The pointer moves down.

4 With the pointer at the bottom, push the

Operation lever in the ◄ ► direction and

 

position it on the text memo number you

 

wish to play back then push the Operation

 

lever in the ▲ direction (► playback).

 

• Playback will start from the time code

 

 

position of the text memo where the pointer

Playback

is located. If the Opetation lever in the 

 

direction (STOP) is pressed during playback

 

or the playback has finished at the end of

 

the clip, then the thumbnail screen appears

 

 

again with the pointer replaced with the text

 

memo where the playback started.

 

• Press the MENU button to select EXIT or

 

press the EXIT button to return the pointer to

 

the upper part of the thumbnail screen.

 

 

 

 

 

 

 

• Pressing the START/STOP button in the

 

text memo screen will not start recording.

 

• For AVC-Intra format clips that cannot be

 

played back, text memo thumbnails cannot

 

be displayed, and may be shown as a

 

icon.

 

 

 

 

 

 

 

Deleting a text memo

1 Select the desired text memo by carrying out steps 1–3 for “Playing back a clip at the position where a text memo is recorded” (Left).

2 Move the pointer to the desired text memo, and then press the SET button on Operation lever.

3 Press the MENU button to select OPERATION → DELETE from the thumbnail menu.

A YES/NO screen appears to confirm that you wish to delete. Select YES with the Operation lever to delete the text memo.

83