Panasonic AG-HPX250EN, AG-HPX250P manual 143

AUDIO SETUP screen

Item	Setting	Notes
LIMITER CH1	Sets the CH1 limiter.	• When the AUDIO AUTO/MANU
	ON, OFF	CH1 switch is set to AUTO
		and auto adjustment mode is
		active, the limiter is disabled
		regardless of these settings.
LIMITER CH2	Sets the CH2 limiter.	• When the AUDIO AUTO/MANU
	ON, OFF	CH2 switch is set to AUTO
		and auto adjustment mode is
		active, the limiter is disabled
		regardless of these settings.
LIMITER CH3	Sets the CH3 limiter.	• When the AUDIO AUTO/MANU
	ON, OFF	CH3 switch is set to AUTO
		and auto adjustment mode is
		active, the limiter is disabled
		regardless of these settings.
LIMITER CH4	Sets the CH4 limiter.	• When the AUDIO AUTO/MANU
	ON, OFF	CH4 switch is set to AUTO
		and auto adjustment mode is
		active, the limiter is disabled
		regardless of these settings.
AUTO LEVEL	Selects the method for setting CH3 level.
CH3	ON:
	Engages the auto adjustment mode. (The limiter is not
	available.)		Menu
	OFF:
	Locks the level.
AUTO LEVEL	Selects the method for setting CH4 level.
CH4	Same setting as AUTO LEVEL CH3.
	ON, OFF
25M REC CH SEL	Selects the audio channels to be recorded in the DVCPRO	• Not available in the following
	and DV formats.	conditions.
	2CH:	· When SYSTEM MODE is
	Only recorded on CH1 and CH2.	1080-59.94i (50i) or 720-
	4CH:	59.94P (50P).
		· When SYSTEM MODE is set
	Records on all four channels.
		to 480-59.94i or 576-50i and
		REC FORMAT is set to the
		DVCPRO50 codec.
		· REC SIGNAL is set to 1394
		(operation depends on 1394
		input status).
		· When compiling to a clip in
		one-clip recording mode.
TEST TONE	Selects the test signal.
	LEVEL1:
	A 1 kHz test tone is output during color bar output.
	LEVEL2:
	Outputs the above test tone at a volume lower than
	LEVEL1.
	OFF:
	Does not output a test tone.

___indicates the factory setting.

143