Screen displays (continued)

2Warnings

REMOTE:

Flashes when device settings of wireless remote control are different.

P2 :

Blinks when no P2 card is inserted or the card is write protected.

P2 FULL:

Blinks when there is no more space left on the P2 card.

P2 LACK:

Blinks in loop rec mode when there is not enough space left on the P2 card.

:

Lights when the battery for the internal clock is depleted.

•“Charging the built-in battery” (Page 27 of Vol. 1)

3Backup unit displays

The following indications show the status of backup units connected to the DVCPRO/DV connector.

The following indications are not displayed when the menu option 1394 CONTROL in the OTHER FUNCTIONS screen is set to OFF. 1394  : Recording

1394  : Recording standby

1394 : The backup unit cannot be controlled.

1394 : No backup unit is connected.

1394 – – : A backup unit is connected but is not in recording or recording standby status.

4Recording format and system frequency indication

1080i

720P

480i

576i

Recording format

•In 1080i, 720P system mode AVC-I 100: AVC-Intra 100 format AVC-I 50: AVC-Intra 50 format DVCPROHD: DVCPRO HD format

•In 480 (576i) system mode DVCPRO50, DVCPRO, DV

5AUTO/MANUAL switch indicator Indicates when the AUTO/MANUAL switch is set to AUTO.

6Information display

The following information is displayed depending on the situation.

•Performance of auto white balance and auto black balance

•Warning and error indication

•Information on switch and button operations

•“MODE CHECK indication” (Page 131)

7 System frequency display

60  : Indicates in 59.94 Hz mode

50  : Indicates in 50 Hz mode

8Letter box recording display

This display appears in the 480i (576i) recording format when LETTER BOX is selected in the menu option ASPECT CONV in the SYSTEM SETUP screen.

9Y GET brightness display

When the Y GET function is used, the image level at the center of the image is indicated in a range between 0% and 109%.

10Recording/playback frame rate display In native recording, the capture frame rate and recording and playback frame rates are displayed.

Example: 60:24PN (recording 60P with the camera-recorder frame rate set to a variable frame rate of 24PN)

Playback applies a 2:3 pull-down to perform 24P over 60P, indicating that 24/60 speed slow playback is performed.

In standard recording only the capture frame rate is indicated.

Example: 24PA (recording 24PA using 2:3:3:2 pulldown for over 60i recording)

11Audio limiter display

This is displayed when the limiter is set to work on CH1, CH2 or CH3, CH4.

122