Tally lamp

The tally lamp can be illuminated during recording by setting the tally LAMP item on the OTHER FUNCTIONS screen (Page 151) to any setting other than OFF.

When the camera-recorder is in any of the following states, the tally lamp blinks.

•When the remaining battery capacity runs out (4 blinks/sec.)

•When the available recording space on the P2 card or the battery power is low (1 blink/sec.)

•When removing the P2 card during access (4 blinks/sec.)

•When there is no recording space left on the P2 card (4 blinks/sec.)

•When there is a warning for GENLOCK IN terminal signal distortion, system error, or a recording defect. (4 blinks/sec.)

Tally lamp (Rear)

Tally lamp (Front)

Shooting

9