Thumbnail operations (continued)

Formatting SD memory cards

SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the camera-recorder, perform the following operation:

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Press the MENU button and select OPERATION → FORMAT from thethumbnail menu.

•The following screen appears. Select SD CARD and press the SET button on the Operation lever.

•Select EXIT if formatting is not required.

3 The following screen appears. Use the Operation lever to select YES.

The SD memory card is formatted.

•SD memory cards can also be formatted from the menu screen. (Page 150)

•Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.

Setting the thumbnail display mode

The thumbnail display mode can be customised to suit your preferences.

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Press the MENU button and select THUMBNAIL → SETUP from thethumbnail menu.

The following screen appears.

INDICATOR:

Select which indicators you want to show on thumbnails and which you want to hide.

ALL HIDE:

ON: All indicators (MARKER, TEXT MEMO, WIDE, PROXY) are not displayed.

OFF: Indication/No indication will be set depending on the following menu. The factory settings are as follows.

MARKER:

Switches the shot mark marker between indication and no indication (ON/OFF). The factory setting is ON (indication).

TEXT MEMO:

Switches the text memo marker between indication and no indication (ON/OFF). The factory setting is ON (indication).

WIDE:

Switches the wide marker between indication and no indication (ON/OFF). The factory setting is ON (indication).

PROXY:

Switches the proxy indicator between indication and no indication (ON/OFF). The factory setting is ON (indication).

92