•The pre-recording and one-clip recording functions are not available.

•Sound is not recorded.

•Data recorded (until the stop recording) in this mode is recorded as a single file.

•There is no output from the DVCPRO/DV connector.

One-shot recording (ONE SHOT REC)

This function records a single shot at each unit of time which has been set.

1 Check that the SYSTEM SETUP screen is set up as described on page 43.

•Refer to the section “Using the setup menus” (Page 28 of Vol. 1) for menu operation.

2 Select ONE SHOT in the menu option REC

FUNCTION in the RECORDING SETUP screen. (Page 141)

3 Set the time in the menu option ONE SHOT TIME in the RECORDING SETUP screen. (Page 141)

4 Press the START/STOP button.

•The camera-recorder will pause recording after making a recording that lasts the duration set in step 3.

•Push the Operation lever in the  direction (STOP) to stop recording.

•To cancel this function, turn the camera- recorder off or select NORMAL in the REC FUNCTION option.

•The following indications appear to the left of the operation status display.

··During recording: “I-REC” stays lit.

··During a pause: “I-PAUSE” stays lit.

··When stopped: “I”- in “I-PAUSE” blinks.

•No other functions are available during operation.

•The pre-recording and one-clip recording functions are not available.

•Sound is not recorded.

•Data recorded (until the stop recording) in this mode is recorded as a single file.

•There is no output from the DVCPRO/DV connector.

•During continuous one-shot recording, recording operation speed may be decreased.

Shooting

45