Thumbnail operations (continued)

To set whether or not the uploaded metadata is recorded

Set ON/OFF in META DATA → RECORD from the thumbnail menu. The factory setting is OFF.

Selecting the USER CLIP NAME recording method

Select META DATA → USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2.

• TYPE1 (Factory setting)

* The COUNT value is indicated as a four-digit

number.

The COUNT value is incremented each time a

new clip is captured if clip metadata has been

read in and TYPE2 has been selected as the

recording method.

The COUNT value can be reset using the

following procedure.

Select META DATA → PROPERTY from the

thumbnail menu, then select USER CLIP NAME

to display the menu shown below.

Select COUNT RESET with the Operation lever

and press the SET button on the Operation lever

to reset the COUNT value to 1.

If clip metadata has been read in

If no clip metadata has been read in or if the setting for recording clip metadata has been turned off

USER CLIP NAME to be recorded

Uploaded data

Same as GLOBAL CLIP ID (UMID data)

• TYPE2

If clip metadata has been read in

If no clip metadata has been read in or if the setting for recording clip metadata has been turned off

USER CLIP NAME to be recorded

Uploaded data + COUNT value*

Same as CLIP NAME

When a P2 card with a memory capacity of 8 GB or more is used in camera-recorder and a one-time continuous recording exceeds the prescribed duration (DVCPRO HD and the AVC-Intra 100: about 5 minutes; DVCPRO50 and the AVC-Intra 50: about 10 minutes; DVCPRO or for DV: about 20 minutes) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value.

90