Using the USER buttons
You can allocate the selected function to USER MAIN and USER buttons 1 to 4.
USER1 – 3 buton
USER MAIN buton
USER4 buton
Selectable Functions
SPOTLIGHT:
Assigns auto iris control on/off for spotlight.
BACKLIGHT:
Assigns auto iris control on/off for backlight compensation. (Page 40)
ATW:
Turns the ATW function on or off. (Page 33)
ATW LOCK:
Pressing this lock during ATW operation locks the white balance. Press again to start the ATW function again.
S.GAIN:
Allocates a function that increases gain to 24 dB or greater.
The gain value can be set with SUPER GAIN on the setting menu SW MODE screen. (Page 138)
D.ZOOM:
Allocates the DIGITAL ZOOM function. Each time the button is pressed, the setting changes in the following order: x2 → x5 → x10 → OFF (x1). (Page 19)
Y GET:
Assigns a function that displays the brightness level at the center of the image.
DRS:
Assigns a function that stretches the dynamic range.
The setting is linked to the ON/OFF of setting of DRS on the setting menu SCENE FILE screen. (Page 37)
TEXT MEMO:
Assigns text memory recording. (Page 42)
SLOT SEL:
Assigns P2 card slot selection.
SHOT MARK: |
| |
| ||
Assigns the shot marker function. (Page 41) | Shooting | |
MAG A. LVL: | ||
| ||
Assigns a function that magnifies the audio level |
| |
meter. (Page 55) |
| |
LVL METER: |
| |
| ||
Allocates a function that switches between CH1/2 |
| |
and CH3/4 for the audio level meter display and |
| |
audio channel for headphones, |
| |
AUDIO OUT terminal output, and HDMI OUT |
| |
output while the button is held down. |
| |
PRE REC: |
| |
Assigns a function that turns the PRE REC |
| |
function on and off. (Page 44) |
| |
WFM: |
| |
Assigns a function that switches WAVE FORM |
| |
display. |
| |
The WAVE FORM display is selected using the |
| |
menu option WFM in the SW MODE screen. |
| |
This is the same function as the WFM button. |
| |
(Page 40) |
| |
LAST CLIP: |
| |
Allocates a function to delete the clip shot |
| |
immediately beforehand. (Page 42) |
| |
FBC: |
| |
Turns the FBC function on or off. (Page 38) |
| |
LCD B.L: |
| |
Allocates a function to switch the backlight |
| |
brightness of the LCD monitor. |
| |
The setting is linked to the LCD BACKLIGHT on |
| |
the setting menu DISPLAY SETUP screen. (Page |
| |
148) |
|
•As factory settings, the following functions are allocated to the buttons displayed.
USER MAIN | : Y GET |
USER1 | : BACKLIGHT |
USER2 | : TEXT MEMO |
USER3 | : DRS |
USER4 | : SLOT SEL |
•If you press a USER button to which one of the functions has been allocated, and then turn OFF the power during operation of the USER button function, the effect added to the image will not be retained.
SPOTLIGHT, BACKLIGHT, ATW, ATW LOCK, S.GAIN, D.ZOOM, Y GET, WFM, MAG A.LVL,
FBC
39