Restoring clips

Restores clips that are defective as a result of sudden powering-down during recording, or removal of the P2 card being accessed.

Only those clips with yellow corrupt clip markers can be restored. Clips with a red corrupt clip indicator cannot be repaired.

Please delete such clips. If the clip cannot be deleted, format the P2 card.

During restoration of the clips, however, the defective-clip indicator may change from yellow to red, resulting in inability to restore the clips.

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Push the Operation lever in the ◄ ► direction and position it on the clip you wish to restore (clips with the yellow corrupt clip indicator which signifies that they can be restored are displayed). Press SET on the Operation lever to select the clip.

3 Press the MENU button, and select OPERATION → REPAIR CLIP from the thumbnail menu.

A YES/NO confirmation screen asks you to confirm that you want to repair the clip. Select YES with the Operation lever if you wish to restore the clip.

Reconnection of incomplete clips

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips.

1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

The thumbnail screen appears on the LCD monitor.

2 Use the Operation lever to select incomplete clips to reconnect.

Usually, thumbnails of incomplete clips (clips with marker) are displayed in line.

3 Press the MENU button and select OPERATION → RE-CONNECTION from the thumbnail menu.

A YES/NO confirmation screen asks you to confirm that you want to reconnect the clip. Select YES with the Operation lever if you wish to reconnect the incomplete clip.

Clips that are connected as a group must be grouped together or they will be displayed as incomplete clips.

Playback

85