RECORDING SETUP screen

Item

Setting

Notes

 

 

REC FUNCTION

Sets special recording modes.

• Not available in the following

 

 

 

NORMAL:

conditions.

 

 

 

The special recording modes are not used.

· When REC SIGNAL is set to

 

 

 

INTERVAL:

1394

 

 

 

· When REC FORMAT is set to

 

 

 

Sets interval recording.

 

 

 

native recording.

 

 

 

ONE SHOT:

 

 

 

· When SYSTEM MODE is set

 

 

 

Sets one-shot recording.

 

 

 

to 1080- 59.94i or 480-59.94i;

 

 

 

LOOP:

 

 

 

and CAMERA MODE is set to

 

 

 

Sets loop recording.

24P or 24PA.

 

 

 

“Using special recording modes” (Page 43)

 

 

 

· When compiling to a clip in

 

 

 

• This function is always set to NORMAL when the power

 

 

 

one-clip recording mode.

 

 

 

is turned on.

· When VFR is set to ON.

 

 

 

 

 

 

ONE SHOT TIME

Sets the duration for one-shot recording.

• Can only be set when REC

 

 

 

1frm, 2frm, 4frm, 8frm, 16frm, 1s

FUNCTION is ONE SHOT.

 

 

 

“One-shot recording (ONE SHOT REC)” (Page 45)

 

 

 

INTERVAL TIME

Sets the time interval of interval recording.

• Can only be set when REC

 

 

 

2frm, 4frm, 8frm, 16frm, 1s, 2s, 5s, 10s, 30s, 1min,

FUNCTION is INTERVAL.

 

 

 

5min, 10min

 

 

 

 

“Interval recording (INTERVAL REC)” (Page 44)

 

 

 

START DELAY

This delays the start of interval and one-shot recording by

• Can only be set when REC

 

 

 

about 1 second.

FUNCTION is INTERVAL or

 

 

 

ON, OFF

ONE SHOT.

 

 

PREREC MODE

Sets PRE REC.

• Not available in the following

 

 

 

ON, OFF

conditions.

 

Menu

 

“Pre-recording (PRE REC)” (Page 44)

· When REC SIGNAL is set to

 

 

 

1394.

 

 

 

 

· When VFR is set to ON.

 

 

 

 

· When REC FORMAT is set to

 

 

 

 

 

 

 

native recording.

 

 

 

 

· When SYSTEM MODE is set

 

 

 

 

to 1080-59.94i or 480-59.94i;

 

 

 

 

and CAMERA MODE is set to

 

 

 

 

24P or 24PA.

 

 

 

 

· When REC FUNCTION is

 

 

 

 

set to something other than

 

 

 

 

NORMAL.

 

 

TC MODE

Sets count correction when using the internal time code

• Not displayed in 1080-50i, 720-

 

 

 

generator.

50P, 576-50i.

 

 

 

DF:

• Not available when operates

 

 

 

Drop frame time code

24P, 24PA or 24PN mode.

 

 

 

NDF:

Counts NDF time code in 24P,

 

 

 

24PA or 24PN mode.

 

 

 

Non drop frame time code

 

 

 

“Setting the time code” (Page 66)

 

 

 

TCG

Sets the mode in which you advance the time code.

 

 

 

 

FREE RUN:

 

 

 

 

The time code is advanced regardless of the operation

 

 

 

 

mode.

 

 

 

 

• In native recording in VFR mode, if the number of

 

 

 

 

frames differs for shooting and recording, the time code

 

 

 

 

changes to REC RUN.

 

 

 

 

REC RUN:

 

 

 

 

The time code is advanced only when recording.

 

 

 

___indicates the factory setting.

141